Home > Research Content
Recently, the research team led by Professor Deng Weiqiao at the Institute of Frontier Chemistry, School of Chemistry and Chemical Engineering, Shandong University, achieved a breakthrough in highly efficient formate–salt cavern hydrogen storage. The related work, titled “Highly Efficient Au₁Pd Single-Atom Alloy Catalyzing Reversible Formate/Bicarbonate Interconversion: Proof-of-Concept for Formate-Salt Cavern Hydrogen Storage,” was published in the top international journal Angewandte Chemie International Edition. Ci Xiuping, a doctoral student at Shandong University, is the first author of the paper; Professor Deng Weiqiao and Associate Professor Ren Guoqing are the co-corresponding authors, and Shandong University is the sole completing institution.
Hydrogen energy, with its high energy density and zero-carbon emission characteristics, is regarded as a key energy carrier for achieving the goal of carbon neutrality. However, efficient, safe, and economical large-scale hydrogen storage technology remains a major bottleneck restricting its scaled application. Existing mainstream physical hydrogen storage approaches generally suffer from high energy consumption and significant safety hazards. In recent years, the chemical hydrogen storage route based on the reversible formate/bicarbonate cycle (HCO₃⁻ + H₂ ↔ HCOO⁻ + H₂O) has attracted considerable attention owing to its mild operating conditions, good safety, and the release of high-purity hydrogen. Meanwhile, salt caverns, with their outstanding advantages of low cost, large capacity, excellent sealing performance, and long-term structural stability, are regarded as ideal geological carriers for large-scale hydrogen storage. However, due to the lack of catalysts capable of efficiently driving the bidirectional formate/bicarbonate conversion under mild conditions, the “formate–salt cavern hydrogen storage system”, which combines a chemical hydrogen storage carrier with salt cavern geological storage, has not yet been realized.
To address the above challenges, the team designed an amine-modified activated carbon-supported Au₁Pd single-atom alloy (SAA) catalyst, Au₁Pd₂₀/AC-NH, in which Au is dispersed as isolated single atoms on the surface of Pd nanoclusters (average particle size of 1.30 nm) (Figure 1). This catalyst achieves highly efficient conversion of the bidirectional formate/bicarbonate reaction under near-ambient conditions: the initial turnover frequency (TOF) of formate dehydrogenation reaches as high as 4568 h⁻¹ at 80 °C and atmospheric pressure, while the TOF of bicarbonate hydrogenation reaches 77 h⁻¹ at 30 °C, atmospheric pressure, and 1.5 MKHCO₃. Compared with the monometallic Pd catalyst, the introduction of trace Au increases the initial dehydrogenation activity by 45% and the hydrogenation activity by 34%. Mechanistic studies reveal that the excellent catalytic performance mainly originates from the unique Au₁Pd single-atom alloy effect and the synergistic effect of the -NH- groups on the support surface. Specifically, the electron-enriched Pd sites promote H₂ dissociation, while the isolated Au sites with Lewis acidity strengthen the adsorption and activation of formate/bicarbonate; together, they accelerate the formation and conversion of reaction intermediates.
Figure 1. Structure of the Au₁Pd₂₀/AC-NH SAA catalyst.
Based on the above highly efficient catalyst, the research team further proposed the “formate–salt cavern hydrogen storage system” (Figure 2) and completed proof-of-concept experiments. This is the first study that combines reversible formate hydrogen storage with salt cavern geological storage and completes a proof-of-concept. The “formate–salt cavern hydrogen storage system” generates formate through bicarbonate hydrogenation and injects it into salt caverns to realize long-period, cross-seasonal hydrogen storage; when hydrogen is needed, the solution is extracted and hydrogen is released on demand through catalytic dehydrogenation, forming a closed-loop operation mode of “chemical storage—on-demand hydrogen supply.” In the proof-of-concept experiment simulating the “formate–salt cavern hydrogen storage system,” the hydrogen storage/release efficiency (released hydrogen/stored hydrogen) remained stably at approximately 97% over five consecutive cycles, and the catalyst retained its structure and particle size after cycling, demonstrating the excellent stability and recyclability of the system. This new hydrogen storage mode provides a proof-of-concept and a feasible technical route for the construction of large-scale hydrogen storage systems.
Figure 2. Schematic diagram of the “formate–salt cavern hydrogen storage system.”
The above work on formate–salt cavern hydrogen storage extends the team’s longstanding research theme in carbon-neutral chemistry—catalytic conversion under ambient, low-energy conditions. In 2025, the team reported two breakthrough advances in Nature Communications: first, they proposed a cobalt-based mechanocatalyst, achieving continuous and efficient synthesis of green ammonia under ambient temperature and pressure via mechanochemistry (ball milling) (Nat. Commun. 2025, 16, 7887); second, they designed a sulfur-bridged molybdenum dual-atom catalyst anchored on a covalent triazine framework (CTF) (Mo–S–Mo/CTF), achieving CO2 hydrogenation to green methanol with 96% selectivity at a near-ambient temperature of 30 °C and 0.9 MPa (Nat. Commun. 2025, 16, 7876).
This research was supported by the National Key Research and Development Program of China, the National Natural Science Foundation of China, the Taishan Scholars Program, the Natural Science Foundation of Shandong Province, and the Young Scholars Future Program of Shandong University, among others.